Moose Sign Repairs
There are two Moose Miner animal character signs up on the hill at 49 Degrees North Ski Resort. They have both received extensive attention over the years requiring some pretty extensive repairs before they could be re-painted. Moose A has two broken front legs and Moose B has a broken antler.
This moose has had interim repairs on the hill leaving some damage from screw holes. But, this is minor and will not cause us any problems. Luckily, all the parts are still intact so gluing them back together is feasible. Initial gluing is shown with clamps from the front then the process of using sawdust filler and glue to fill in gaps.
Pete glues the wood back together using sawdust filler for the gaps because with the drastic temperature variances. We must use similar product to fill gaps due to that old expansion and contraction law, you know. Placed upside down on his antlers moose A dries for 24 hours.
Metal reinforcement is installed on the back of both front legs and a wood reinforcement is placed on his antler, which is not broken yet.
We heed the wisdom of Benjamin Franklin’s old phrase, https://www.ag.ndsu.edu/news/columns/beeftalk/beeftalk-an-ounce-of-prevention-is-worth-a-pound-of-cure/
”An ounce of prevention is worth a pound of cure,”
….so, we decide to reinforce the antler now instead of later.
This moose has a broken antler when he arrives. The antler is glued back on and damaged areas filled.
The antler will need significant reinforcement to hold up. Additionally, we realize that placing reinforcement only on the antler portion of the sign will cause more stress to that specific area. Exactly what we don’t want to do. We can’t elevate the surface unevenly, without compromising the mounting (to the tree) concentrating more mounting stress on the weakest area. Consequently, we went with a solid top to bottom board reinforcement, intending to use paint to disguise it from the front.
Both signs areset aside to dry, ready for repainting.